Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFamco Chimney Liner & Rebuild in Huntington: What to Know First
We provide independent Famco chimney liner and rebuild service throughout Huntington, with most liner replacements and partial rebuilds completed in a single visit after our Level-2 camera inspection. Our no-hassle upfront pricing means the estimate we give is the number on the invoice. As an independent Famco service provider, we are not affiliated with or authorized by Famco, but we stock and install Famco-compatible components alongside professional-grade alternatives from DuraFlex, HeatShield, and Gelco.
This page is for Huntington homeowners with a Famco liner, cap, or venting component that has reached the end of its service life, or for those who have been told their chimney needs a partial or full rebuild and want a second opinion backed by photos they can see for themselves. If that is your situation, call (631) 776-4075. A live person answers, 24 hours a day.
How Famco Products Fail - and How We Fix Them
- Famco 304 stainless flexible liners in pre-1990 Huntington colonials - These were sold as lifetime products, but the 304 alloy in Famco’s earlier flexible liner series does not hold up to the acidic condensate produced by modern, efficient appliances. We see this especially in homes south of Jericho Turnpike where homeowners switched to a high-efficiency boiler without upsizing the liner. The fix is a 316Ti or AL29-4C upgrade, not another 304 replacement, and we document the acid damage with camera photos before we quote.
- Famco rigid stainless tee assemblies (RFT and RFT-II series) - The tee body and snout connection points corrode from the inside out where condensate pools. Homeowners smell a faint metallic odor or notice staining on the basement ceiling below the tee. We replace with a matched 316Ti tee or, if the appliance venting profile has changed, spec a DuraFlex or Gelco equivalent with better condensate drainage geometry.
- Famco galvanized vent connectors in garage and utility room installations - Galvanized steel was common in Famco’s economy venting lines through the early 2000s. In Huntington’s coastal climate, the salt air accelerates exterior rust even when the interior seems sound. Russell Haines has pulled connectors off the Southdown and Lloyd Harbor areas that looked fine from the appliance side but were paper-thin on the exterior elbow. We replace with AL29-4C or 316Ti depending on appliance category, never another galvanized run.
- Famco chimney caps with integrated spark arrestors (CPE and CPZ series) - The mesh on these caps packs with creosote in wood-burning applications, but more critically, the base flange rusts through where it meets the crown, letting water run straight down the flue. Water is what destroys liners from the outside in. We fit a stainless or copper cap with a proper drip edge and screen spacing suited to your fuel type, and we inspect the liner for external water damage while we are on the roof.
- Famco terra-cotta lined chimneys with a partial stainless retrofit - Some Huntington homes have a Famco stainless liner dropped partway down a terra-cotta flue, usually where a previous owner cheaped out on a full liner. The gap between the stainless bottom and the terra-cotta below collects acidic condensate and debris, and the terra-cotta spalls from freeze-thaw. We see this pattern in 1950s ranches from Elwood to Greenlawn. The fix is a full liner replacement or, if the terra-cotta is too far gone, a partial rebuild with a new liner system sized to the appliance.
Our Famco Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, day or night. We book a Level-2 camera inspection with a Famco-literate technician.
- 2
Inspect and document. We run a camera the full length of the flue, photograph every defect, and record measurements for liner diameter, total length, and any offsets. You see the photos. We give a plain-English verdict: repair, replace, or rebuild.
- 3
Spec the parts. If Famco OEM is available and appropriate for your application, we quote it. If a DuraFlex, HeatShield, or Gelco equivalent offers better longevity or warranty terms for your specific appliance, we explain the trade-off and let you decide. No builder-grade substitutes.
- 4
Repair or rebuild. Most liner replacements and partial rebuilds finish in one visit. Full rebuilds may need a second day. Technicians are background-checked, uniformed, and arrive when we say they will.
- 5
Test and verify. We pressure-test or smoke-test every liner installation per NFPA 211, show you the test result, and leave the work area clean.
- 6
Guarantee in writing. The 90-Day Done Right Promise covers the job. If something is not right, we make it right. No paperwork to dig up, no arguing.
What Famco Chimney Liner & Rebuild Costs in Huntington
These are the ranges we see most often for Famco systems in Huntington homes. Your exact quote depends on flue length, access, and whether the existing liner can be extracted without masonry damage.
| Service | Typical Range |
|---|---|
| Famco liner repair (patch, seal, or localized fix) | $450 - $850 |
| Famco flexible liner replacement (single flue, standard access) | $2,200 - $3,800 |
| Famco rigid liner replacement with new tee assembly | $2,800 - $4,500 |
| Partial chimney rebuild with new liner system | $4,500 - $7,500 |
| Full chimney rebuild (above roofline) with liner | $8,500 - $14,000 |
What moves the price: flue length over 25 feet, offset bends that require a flexible liner rather than rigid, demolition of a failed terra-cotta flue that has collapsed, and exterior access issues on steep roofs or tight Huntington lots. We price every job upfront after inspection, not by the hour. Call (631) 776-4075 for a free estimate.
Why Huntington Homeowners Call Hearthstone Chimney Co. for Famco Work
We have been answering the phone with a live person for over 42 years, and we plan to be in Huntington thirty years from now. That changes how we treat every job. The 90-Day Done Right Promise is in writing with no arguing, governed by our K.E.Y.S. values: Krafted right, Every time, Your home first, Standing behind it. Our technicians know Famco product lines well enough to spot the difference between a Series RFT tee and an RFT-II, and they carry DuraFlex, HeatShield, and Gelco alternatives when Famco OEM is not the best fit. Most jobs finish in a single visit. Photos you can see, a plain-English verdict. A square deal: no surprises on the bill. Done right - and we stand behind it.
FAQs
No. As an independent Famco service provider, we are not affiliated with Famco, but installing a compatible professional-grade liner or rebuild component does not void any remaining manufacturer warranty on the original product. Warranty coverage on the original Famco part depends on its age and the terms at time of purchase. We document everything so you have records if a warranty claim arises. Call (631) 776-4075 if you want us to review your paperwork.
Some Famco OEM components are available; others have been discontinued. When OEM is not obtainable, we source equivalent or superior 316Ti and AL29-4C components from DuraFlex, Gelco, or Olympia Chimney that meet or exceed the original spec. We never install builder-grade substitutes. Call (631) 776-4075 and we will check availability for your specific model.
The camera inspection tells the story. Localized pitting or a single corroded joint often repairs well. Widespread thinning, multiple perforations, or a liner that has separated from the appliance connector usually means replacement. We show you the photos and explain which category you are in. No recommendation without evidence you can see. Call (631) 776-4075 to schedule.
A compromised liner can leak carbon monoxide into living spaces or allow creosote-ignited chimney fires to reach combustible framing. The risk is real, but we do not scare-sell. If your liner is deteriorating but the appliance is not in active use, the urgency is lower. If you are burning regularly, we recommend addressing it before the next heating season. Our free inspection gives you the facts to decide. Call (631) 776-4075.
Most flexible liner replacements in a standard Huntington colonial or cape take four to six hours from setup to test. Rigid liner systems with a new tee assembly may run six to eight hours. Partial or full rebuilds span one to two days depending on weather and masonry cure requirements. We give you a time estimate with your upfront price. Call (631) 776-4075 for a slot.
A clean chimney isn’t a luxury - it’s just the job done right. If your Famco liner or chimney needs attention in Huntington, we are ready when you are.
Call (631) 776-4075 today. A live person answers, 24 hours a day, 7 days a week. Estimates are free. Our $50 off any repair over $250 and permanent 5% senior and veteran discounts apply to liner and rebuild work. We also offer a free second opinion on any written estimate you have received elsewhere.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Huntington and nearby areas.