Gelco Chimney Cleaning & Sweep Nationwide

Gelco Chimney Cleaning & Sweep in Huntington: What to Know First

We provide independent Gelco chimney cleaning and sweep services in Huntington, with most inspections and cleanings completed in a single visit and upfront pricing agreed before we start. A standard Gelco annual sweep with Level 1 inspection runs $89-$175, while a Level 2 camera inspection for older Gelco systems runs $225-$350. We do not upsell liners or caps a chimney does not need, and we document every finding with photos you can see for yourself.

Call (631) 776-4075

This page is for Huntington homeowners who own a Gelco chimney cap, Gelco chimney liner, or Gelco top-mount damper and need honest cleaning, inspection, or maintenance. We are not affiliated with or authorized by Gelco; we are an independent Gelco service provider with over 20 years of hands-on experience with their product lines. If you are unsure whether your chimney has Gelco components, call us at (631) 776-4075 and we will identify them on arrival.

How Gelco Products Fail - and How We Fix Them

• Gelco chimney caps (Model A- and B-series) with clogged mesh screens. The 3/4-inch mesh on older Gelco A-series caps narrows faster than wider-mesh competitors because Huntington’s oak and maple debris is particularly fine in autumn. We remove the cap, clean the screen with a wire brush and compressed air, and check the underlying flue for moisture staining that indicates the cap’s overhang has shifted out of level.
• Gelco pre-fab chimney liners (Multi-Flex series) with separated seam joints. Multi-Flex liners installed in the 1990s and early 2000s used a single-lock seam that can work open after repeated freeze-thaw cycles in Huntington’s coastal climate. During cleaning, we run a camera to inspect every seam; if separation is minor, we document it for monitoring. If it has opened past 1/8 inch, we recommend a HeatShield cerfractory seal or a DuraFlex replacement liner, priced upfront.
• Gelco top-sealing dampers (Lyemance and Lock-Top series) with rusted chains or stuck flaps. The cast-aluminum damper plate on Lyemance units resists corrosion well, but the steel lift chain and spring assembly do not, especially in salt-air conditions within two miles of Huntington Harbor. We clean the firebox and smoke chamber, then test damper operation; a frozen damper flap means creosote has baked into the hinge, and we will show you the camera image before quoting repair.
• Gelco stainless steel chimney caps with base ring separation. The base ring on Gelco’s mid-2000s stainless caps was spot-welded at four points; after a decade of Long Island’s thermal cycling, two of those welds typically crack. We spot this during routine sweep because the cap shifts slightly in high wind. We can re-secure with stainless hardware or replace with a current Gelco model or equivalent Olympia Chimney cap.
• Gelco chimney pots and decorative shrouds with internal creosote buildup. Homeowners rarely realize that Gelco’s terracotta-style chimney pots, common on Huntington’s Centerport and Wincoma cottages, have no internal draft induction. The narrow throat traps creosote, and because the pot sits on a decorative shroud, standard brushes miss the top two feet of flue. We use a reverse-sweeping whip head and vacuum to clear this zone, then camera-verify.

Our Gelco Chimney Cleaning & Sweep Process

1. 1
   Call and schedule. A live person answers, 24 hours a day. We ask your chimney’s age, fuel type, and any known Gelco components. We quote the inspection level and sweep price before booking.
2. 2
   Arrival and protection. Our technician arrives in uniform, lays drop cloths, and confirms the Gelco model by visual inspection. We photograph the system’s condition before touching anything.
3. 3
   Level 1 or Level 2 inspection. Level 1 covers accessible portions of the chimney, firebox, and flue. Level 2 adds a camera run through the flue and inspection of attics, crawl spaces, or exterior joints. We use the camera on every Gelco liner over 15 years old.
4. 4
   Sweep and debris removal. We select brushes and whips matched to your flue diameter and Gelco liner material. Multi-Flex liners get poly bristles; masonry flues with Gelco caps get wire. A HEPA vacuum runs continuously.
5. 5
   Parts decision and documentation. If we find a failed Gelco component, we explain OEM versus quality aftermarket options. Gelco caps are still manufactured; older Multi-Flex liners may be better replaced with DuraFlex. You see the camera images before deciding.
6. 6
   Test, cleanup, and guarantee. We perform a draft test and smoke-pellet check, remove all protective coverings, and leave a written report with photos. Every job carries our 90-Day Done Right Promise in writing.

What Gelco Chimney Cleaning & Sweep Costs in Huntington

Three factors move the price: accessibility (steep roof, tight attic), severity of creosote buildup, and whether Gelco parts are still in production or require aftermarket substitution. We agree to the final number before work begins. Estimates are free. Call (631) 776-4075 for an exact quote.

Why Huntington Homeowners Call Hearthstone Chimney Co. for Gelco Work

We have been answering the phone with a live person for over 42 years, and we plan to be here in thirty more. That changes how we treat every Gelco job in Huntington. Our 90-Day Done Right Promise is in writing with no arguing - if it is not right, we come back. Russell Haines, our owner, has spent the last decade reading fireboxes and flue liners along West Neck Road and through Wincoma, and he trains our technicians to document every inspection with photos and a plain-English verdict. When a Gelco component needs replacement, we work with professional-grade brands - DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield - never builder-grade substitutes. Background-checked, uniformed technicians complete most jobs in a single visit. A clean chimney isn’t a luxury - it’s just the job done right.

FAQs